Expert Answers about Holiday Rambler
- Correct Steering Stabilizer For 2019 Holiday Rambler 29M on Ford F-53 Chassis
- We have the exact steering stabilizer you need for your 2019 Holiday Rambler Admiral 29M built on a Ford F-53 chassis, which is the following part:
- Roadmaster Exact Center Steering Stabilizer # RM33RR
This will do a really nice job of centering your rig, allowing for much better handling of your motorhome.
view full answer... - Can I Dolly Tow a 2019 Ford Edge SEL with FWD
- Yes. According to my research, the FWD models of the 2019 Ford Edge SEL should be towed using a dolly; I would recommend checking your vehicle's owner's manual to confirm this information. The Demco Kar Kaddy SS Tow Dolly # DM9713045 is the perfect solution to accomplish this as long as the distance between the outside tire treads on your vehicle is less than 76".
On top of the hydraulic disc brakes that make this tow dolly a great choice, the EZ latch surge coupler eliminates the need...
view full answer... - Replacement Lift Motor for Fan-Tastic Vent With Rain Sensor
- We do have replacement lift motors available for a Fan-Tastic vent, but 2000 TS is not actually a model number. To find out which lift motor you need there should be a number 7 or 17 on the actual motor, which is the RPMs of that motor.
If the motor has a 7 on it the correct replacement is Replacement Lift Motor for Fan-Tastic Vent B Series Roof Vents and we no longer have it available, if it has 17 on it then the correct part is # FVK6010-81 (White) or # FVK6010-80 (Off-White).
view full answer... - Anti-Sway Bar for 2017 Holiday Rambler Endeavor Motorhome With V-Ride Suspension
- Good question, because the best thing you can do by far on your motorhome is to install a rear anti-sway bar because they are a vast improvement over the OEM sway bars with thicker construction for the greatest reduction in sway and improvement in overall handling. After that you can further improve the ride by adding a front anti-sway bar, but definitely start with a rear anti-sway bar. The fits for your 2017 Holiday Rambler Endeavor motorhome with V-Ride suspension are the following:
-...
view full answer... - Best Replacement for Coach Steps 725-0041
- I spoke with Lippert and they said the Kwikee 35 Series Electric RV 1-Step part # LC3691461 will be a direct replacement for the Coach Steps 725-0041. It will be a bolt-on install for the most part for the exception of changing out the door switch with the new one that comes with the kit.
view full answer... - Heavy Duty Tow Hitch Recommendation for a 2008 Ford F-350
- Yes, the Curt Trailer Hitch Receiver part # C15810 which is a fit for your 2008 Ford F-350 will allow you to tow your 2000 Holiday Rambler Aluma Lite 30SKS without the use of a weight distribution system assuming the figures you provided on the trailer are correct. This hitch has a 20,000 lbs gross trailer weight (GTW) and 2,700 lb tongue weight (TW) rating with a 2-1/2" receiver tube opening.
According to the instructions for this hitch, the professional installation time is 30 minutes...
view full answer... - Replacement Kwikee Step Motor for Part 5973820 on a 1999 Holiday Rambler Endeavor
- The correct Kwikee Step Motor Replacement Kit for your 5973820 on your 1999 Holiday Rambler Endeavor is part # LC379608. We confirmed this with Lippert.
I checked out the answer page that you referenced and the customer was asking about the Kwikee Motor # LC379147 which is different than the motor in the correct Replacement Kit # LC379608. This is why we said that the motor wouldn't work.
view full answer... - Correct Steering Stabilizer for a 2017 Holiday Rambler Vacationer 35P
- The 2017 Holiday Rambler Vacationer 35P is on a Ford F-53 chassis which I believe you alluded to therefore the correct Roadmaster Reflex Steering Stabilizer for you is part # RM-RBK22-RSSA. I have attached an install video of the stabilizer installed on a similar motorhome with the same chassis for you as well.
view full answer... - What Size Bolt Does the Replacement Jam Nut # WM9072F Fit
- The Replacement Jam Nut # WM9072F that you referenced does look similar to the jam nuts that you are currently using to secure your Wheel Masters cover. To determine if they will fit your application though you need to measure your bolt size.
This jam nut has 32 mm dimensions so your bolt needs to match for a fit. If you happen to have the 19F0J wheel liners then you need part # WM9073 instead.
view full answer... - Sway Bars and Suspension Enhancement For a 2018 Holiday Rambler Vacationer XE 32A
- According to Holiday Rambler your 2018 Vacationer XE 32A is either going to be on a 2017 or 2018 Ford F-53 chassis with a GVWR of 22,000lbs. You can confirm that this information is correct with the chassis tag posted on the wall next to your drivers seat.
The Roadmaster Front Anti-Sway Bar # RM-1139-148 will replace your factory sway bar. This bar is constructed of thick 4140 chromoly steel for superior strength and uses polyurethane bushings for increased stability over traditional...
view full answer... - Replacement Foot Plate For Lippert 359352 Hydraulic Jack
- We have the right replacement foot plate for your 359352 jack, though the part number you referenced won't fit. The correct replacement foot plate is the following:
- Replacement Foot Plate for Lippert Power Gear Hydraulic Jack # LC359344
This doesn't come with a bolt but will work with a Grade 8, 3/4"-16 x 1-1/2 bolt.
view full answer... - Size of Wheel Internal Tire Sensor for TST TPMS Systems Fits
- The manufacturer, TST, has confirmed that the Internal Tire Sensor for TST TPMS Systems # TST-507-INT-S1 fits on up to 16 inch wheels; there isn't a smallest or narrowest wheel these sensors work on. The bands the sensor comes on is 51 inches (4 feet).
I have added a link below to a video review for you to check out as well of the Internal Tire Sensor for TST TPMS Systems # TST-507-INT-S1.
view full answer... - Replacement Motor & Gear For Lippert Coach Step 725-0041 Single Step
- The 725-0041 is the Lippert Coach Step single step, and we do have the replacement motor and gear for your steps; what you will need are the following:
- Replacement Motor for Lippert Electric Coach Step # LC301695
- Replacement Gear for Lippert Single and Double Electric Coach Step # LC301696
view full answer... - 2016 Holiday Rambler Navigator XE 35 B Model Snap Pads
- There is no specific fit guide for jack feet so you'll need to measure your jack feet to know which size will fit your RV.
For example if you have 10" jack feet you'll want the SnapPad Jack Pads for Class A and C Motorhome w/ 10" Octagon or Concave Round Jack Feet - Qty 4 Item # SP84FR4.
If you measure and reply back with what you have I can pick out the correct pads for you.
I've also attached our page of SnapPad sizes for your convenience.
view full answer... - Front & Rear SumoSprings That Fit 2022 Holiday Rambler Admiral Motorhome
- Sure thing, we can get you both front and rear SumoSprings that fit your 2022 Holiday Rambler Admiral. You didn't mention the model of your Admiral, so while the front springs will be the same no matter what, the rear springs are going to depend on which model you have. I'll go ahead and list them out for you to make it easy to order.
Front Axle - 2022 Holiday Rambler Admiral Motorhome 28A, 29M, 32S, 34J & 35R
- SumoSprings Rebel Custom Helper Springs - Front Axle # SSF-170-40-2
Rear...
view full answer... - Motor Upgrade Kit For A 1999 Holiday Rambler Vacationer With Lippert 32 Series Steps
- Yes!
The Motor Upgrade Kit for Kwikee Electric RV Steps # LC379145 is everything you need for your 1999 Holiday Rambler with the Lippert 32 series steps.
The motor included in this kit has 40% more torque than your OEM motor, and includes screws, washers, and nuts for installation.
view full answer... - Fit of Camco CAM43980 Adjustable Screen Door Protector on Challenger Screen Door
- The Camco # CAM43980 screen door protector isn't designed to be specific to any particular door. The protector is 24 inches wide, and is height adjustable from 20-29 inches, as shown in the provided photo. So, you can measure your existing door to see if those measurements would work for you.
If you need something that can adjust up to 32 inches, use # CAM43991.
view full answer... - Does the Timbren FRF53A Fit on a 2019 Holiday Rambler 33C Vacationer on Ford F-53 Chassis
- I was able to confirm with Timbren that the Timbren Rear Suspension Enhancement System # TFRF53A is a confirmed fit on the rear axle of your 2019 Holiday Rambler 33c Vacationer on the Ford F-53 chassis. I've linked the installation we did on a similar F-53 chassis coach that you may want to refer if you're going to be installing these jounce bumpers yourself.
view full answer... - Steering Stabilizer For 2008 Holiday Rambler Coach with Roadmaster Chassis With Leaf Springs
- I was able to confirm that the steering stabilizer you need for your 2008 Holiday Rambler motorhome with Roadmaster chassis with leaf springs is the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK8-RSSA. I confirmed the fit with Roadmaster Inc.
They don't have any Anti-Sway Bars compatible with your chassis at this time.
view full answer... - Does The Wiper Technologies Heavy Duty Windshield Wiper Blade Install Via A J-Hook
- Yes, the Wiper Technologies Heavy Duty Windshield Wiper Blade - Beam Style - 36" - Qty 1, part # WPR66FR, will attach via a j-hook. It comes with an adapter that makes it compatible with a j-hook style wiper.
I have included an installation video link below.
view full answer...
Go To Results